NF EN ISO 10439-1

NF EN ISO 10439-1

June 2015
Standard Current

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1 : general requirements

ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-1:2015 specifies general requirements applicable to all such machines. ISO 10439-1:2015 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. It also does not apply to packaged, integrally geared centrifugal plant, and instrument air compressors, which are covered by API 672. Hot gas expanders over 300 °C (570 °F) are not covered by ISO 10439-1:2015. ISO 10439-1:2015 contains information pertinent to all equipment covered by the other parts of ISO 10439. It shall be used in conjunction with the following parts of ISO 10439, as applicable to the specific equipment covered: ISO 10439‑2; ISO 10439‑3 ISO 10439‑4

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

June 2015

Number of pages

139 p.

Reference

NF EN ISO 10439-1

ICS Codes

23.140   Compressors and pneumatic machines
75.180.20   Processing equipment

Classification index

E51-233-1

Print number

1

International kinship

ISO 10439-1:2015

European kinship

EN ISO 10439-1:2015
Sumary
Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1 : general requirements

ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-1:2015 specifies general requirements applicable to all such machines.

ISO 10439-1:2015 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. It also does not apply to packaged, integrally geared centrifugal plant, and instrument air compressors, which are covered by API 672. Hot gas expanders over 300 °C (570 °F) are not covered by ISO 10439-1:2015.

ISO 10439-1:2015 contains information pertinent to all equipment covered by the other parts of ISO 10439. It shall be used in conjunction with the following parts of ISO 10439, as applicable to the specific equipment covered:

  • ISO 10439‑2;
  • ISO 10439‑3
  • ISO 10439‑4
Replaced standards (1)
NF EN ISO 10439
March 2003
Standard Cancelled
Petroleum, chemical and gas service industries - Centrifugal compressors

<p>ISO 10439 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of centrifugal compressors for use in the petroleum, chemical and gas service industries. It is not applicable to machines that develop less than 35 kPa above atmospheric pressure, nor is it applicable to packaged, integrally geared centrifugal air compressors, which are covered in ISO 10442.</p>

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes, abréviations et définitions
  • 4 Généralités
  • 5 Accessoires
  • 6 Contrôle, essais et préparation pour l'expédition
  • 7 Données fournies par le fournisseur
  • Annexe A Mode opératoire pour déterminer le balourd résiduel
  • Annexe B Garnitures types de bouts d'arbre
  • Annexe C Exigences relatives aux rapports d'analyse latérale
  • Annexe D Exigences relatives aux rapports d'analyse en torsion
  • Annexe E Paliers magnétiques
  • Annexe F Essais d'étanchéité au gaz sec dans l'atelier du fabricant
  • Annexe G Lignes directrices pour les systèmes anti-pompage
  • Annexe H Modèle type d'enregistrement des offres
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ