NF EN ISO 10439

NF EN ISO 10439

March 2003
Standard Cancelled

Petroleum, chemical and gas service industries - Centrifugal compressors

ISO 10439 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of centrifugal compressors for use in the petroleum, chemical and gas service industries. It is not applicable to machines that develop less than 35 kPa above atmospheric pressure, nor is it applicable to packaged, integrally geared centrifugal air compressors, which are covered in ISO 10442.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2003

Number of pages

139 p.

Reference

NF EN ISO 10439

ICS Codes

23.140   Compressors and pneumatic machines
75.180.20   Processing equipment

Classification index

E51-233

Print number

1 - 13/06/2003

International kinship

ISO 10439:2002

European kinship

EN ISO 10439:2002
Sumary
Petroleum, chemical and gas service industries - Centrifugal compressors

ISO 10439 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of centrifugal compressors for use in the petroleum, chemical and gas service industries. It is not applicable to machines that develop less than 35 kPa above atmospheric pressure, nor is it applicable to packaged, integrally geared centrifugal air compressors, which are covered in ISO 10442.

Standard replaced by (4)
NF EN ISO 10439-1
June 2015
Standard Current
Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1 : general requirements

<p>ISO 10439 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-1:2015 specifies general requirements applicable to all such machines.</p> <p>ISO 10439-1:2015 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. It also does not apply to packaged, integrally geared centrifugal plant, and instrument air compressors, which are covered by API 672. Hot gas expanders over 300 °C (570 °F) are not covered by ISO 10439-1:2015.</p> <p>ISO 10439-1:2015 contains information pertinent to all equipment covered by the other parts of ISO 10439. It shall be used in conjunction with the following parts of ISO 10439, as applicable to the specific equipment covered:</p> <ul> <li>ISO 10439‑2;</li> <li>ISO 10439‑3</li> <li>ISO 10439‑4</li> </ul>

NF EN ISO 10439-2
June 2015
Standard Current
Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2 : non-integrally geared centrifugal and axial compressors

<p>ISO 10439-2:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-2:2015 specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in ISO 10439-1. These machines do not have gears integral with their casing but can have external gears.</p>

NF EN ISO 10439-3
June 2015
Standard Current
Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3 : integrally geared centrifugal compressors

<p>ISO 10439-3:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439-4:2015 specifies integrally geared centrifugal compressors in conjunction with ISO 10439‑1.</p>

NF EN ISO 10439-4
June 2015
Standard Current
Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part4 : expander-compressors

<p>ISO 10439-4:2015 specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. ISO 10439‑4:2015 specifies requirements for expander-compressors, in addition to the general requirements specified in ISO 10439‑1:2015.</p>

See more
Table of contents
View the extract
  • Avant-propos
    v
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    2
  • 4 Conception de base
    4
  • 4.1 Généralités
    4
  • 4.2 Carters
    7
  • 4.3 Diaphragmes intermédiaires et aubages de guidage à l'aspiration
    9
  • 4.4 Raccordements au carter
    9
  • 4.5 Forces et moments externes
    11
  • 4.6 Éléments tournants
    11
  • 4.7 Paliers et logements de paliers
    13
  • 4.8 Garnitures d'arbres
    15
  • 4.9 Dynamique
    24
  • 4.10 Circuits d'huile de lubrification et d'huile d'étanchéité
    31
  • 4.11 Matériaux
    32
  • 4.12 Plaques signalétiques et flèches de rotation
    36
  • 5 Accessoires
    36
  • 5.1 Organes moteurs
    36
  • 5.2 Accouplements et protecteurs
    37
  • 5.3 Plaques de montage
    37
  • 5.4 Commandes et instrumentation
    40
  • 5.5 Canalisations et accessoires
    45
  • 5.6 Outils spéciaux
    47
  • 6 Contrôle, essais et préparation pour l'expédition
    47
  • 6.1 Généralités
    47
  • 6.2 Contrôle
    47
  • 6.3 Essais
    49
  • 6.4 Préparation pour l'expédition
    54
  • 7 Données fournies par le vendeur
    56
  • 7.1 Généralités
    56
  • 7.2 Propositions
    57
  • 7.3 Données contractuelles
    60
  • Annexe A (informative) Feuilles de données types
    63
  • Annexe B (informative) Spécifications relatives aux matériaux des composants principaux
    88
  • Annexe C (normative) Exigences concernant les plans et données du vendeur de compresseur centrifuge
    92
  • Annexe D (normative) Procédure permettant de déterminer le déséquilibre résiduel
    102
  • Annexe E (informative) Schémas logiques de dynamique du rotor
    109
  • Annexe F (informative) Nomenclature d'un compresseur centrifuge
    113
  • Annexe G (normative) Forces et moments
    114
  • Annexe H (informative) Liste de contrôle
    117
  • Annexe I (informative) Considérations relatives aux essais types des garnitures à gaz
    120
  • Annexe J (informative) Considérations relatives à l'utilisation de paliers magnétiques actifs
    122
  • Bibliographie
    125
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ