NF ISO 9211-4

NF ISO 9211-4

May 2022
Standard Current

Optics and photonics - Optical coatings - Part 4 : specific test methods : abrasion, adhesion and resistance to water

ISO 9211 describes surface treatments of components and substrates, excluding ophthalmic optics (spectacles), by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods wherever necessary, but it is not intended to define the process method. This document describes specific test methods of abrasion, adhesion and resistance to water for coating environmental durability tests that are identified in ISO 9211‑3 but not described in other normative references. They are typically performed in sequence with other environmental durability tests, an example is shown in ISO 9211‑3:2008, Annex A.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

May 2022

Number of pages

19 p.

Reference

NF ISO 9211-4

ICS Codes

37.020   Optical equipment

Classification index

S10-005-4

Print number

1

International kinship

ISO 9211-4:2022
Sumary
Optics and photonics - Optical coatings - Part 4 : specific test methods : abrasion, adhesion and resistance to water

ISO 9211 describes surface treatments of components and substrates, excluding ophthalmic optics (spectacles), by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods wherever necessary, but it is not intended to define the process method.

This document describes specific test methods of abrasion, adhesion and resistance to water for coating environmental durability tests that are identified in ISO 9211‑3 but not described in other normative references. They are typically performed in sequence with other environmental durability tests, an example is shown in ISO 9211‑3:2008, Annex A.

Replaced standards (1)
NF ISO 9211-4
November 2012
Standard Cancelled
Optics and photonics - Optical coatings - Part 4 : specific test methods

<p>ISO 9211 describes surface treatments of components and substrates, excluding ophthalmic optics (spectacles), by the application of optical coatings and gives a standard form for their specification. It defines the general characteristics and the test and measurement methods wherever necessary, but it is not intended to define the process method.</p> <p>ISO 9211-4:2012 describes specific test procedures for coating environmental durability tests that are identified in ISO 9211-3 but not described in other normative references. They are typically performed in sequence with other environmental durability tests, as shown in ISO 9211-3:2008, Annex A.</p>

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Préparation avant essai
  • 5 Essais d'abrasion: essai de tampon d'étamine/gomme (méthode de conditionnement 01)
  • 6 Essai d'adhérence: essai au ruban (méthode de conditionnement 02)
  • 7 Essai d'adhérence: essai de quadrillage (méthode de conditionnement 03)
  • 8 Résistance à l'eau: exposition à l'eau (méthode de conditionnement 04)
  • 9 Essai d'adhérence: essai de traction (méthode de conditionnement 05)
  • 10 Code des essais d'environnement
  • Annexe A (normative) Matériaux pour les essais de résistance à l'abrasion des traitements optiques
  • Annexe B (normative) Préparation du tampon d'étamine, de l'enveloppe protectrice et de la tête de frottement de l'appareil d'abrasion pour les essais d'abrasion modérée des traitements optiques
  • Annexe C (normative) Examen visuel des traitements optiques
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ