NF ISO 6452

NF ISO 6452

January 2022
Standard Current

Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobile

This document specifies a test method which is intended to determine the fogging characteristics of rubber- or plastics-coated fabrics that are used as trim materials in the interior of motor vehicles. The method can also apply to fluid, pasty, powdered or solid raw materials which are the basis for such trim materials or from which the materials are manufactured. The method can also apply to other materials and finished products. The procedure is applicable to the measurement of fog condensate on glass surfaces within the limits of the test conditions. This test cannot measure accurately those cases in which: —    the surface tension of the condensate is low, resulting in early coalescing into a thin transparent film; —    the condensate is present in such a large quantity that the droplets coalesce and form a heavy oily/clear film (this heavy film gives false readings). In such cases, the gravimetric method is preferred.

View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2022

Number of pages

20 p.

Reference

NF ISO 6452

ICS Codes

43.040.60   Bodies and body components
59.080.40   Coated fabrics

Classification index

G37-137

Print number

1

International kinship

Sumary
Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobile

This document specifies a test method which is intended to determine the fogging characteristics of rubber- or plastics-coated fabrics that are used as trim materials in the interior of motor vehicles.

The method can also apply to fluid, pasty, powdered or solid raw materials which are the basis for such trim materials or from which the materials are manufactured. The method can also apply to other materials and finished products.

The procedure is applicable to the measurement of fog condensate on glass surfaces within the limits of the test conditions. This test cannot measure accurately those cases in which:

—    the surface tension of the condensate is low, resulting in early coalescing into a thin transparent film;

—    the condensate is present in such a large quantity that the droplets coalesce and form a heavy oily/clear film (this heavy film gives false readings).

In such cases, the gravimetric method is preferred.

Replaced standards (1)
NF ISO 6452
October 2007
Standard Cancelled
Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles

Le présent document spécifie une méthode d'essai destinée à déterminer les caractéristiques d'embuage des textiles revêtus de caoutchouc ou de plastique utilisés comme matériaux de garnissage dans l'habitacle automobile.

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Principe
  • 5 Matériaux
  • 6 Appareillage
  • 7 Éprouvettes et échantillons pour essai
  • 8 Conditionnement
  • 9 Mode opératoire
  • 10 Expression des résultats
  • 11 Exactitude
  • 12 Rapport d'essai
  • Annexe A (informative) Exactitude
  • Annexe B (informative) Comparaison entre les résultats des essais réalisés dans une enceinte à air et ceux réalisés dans un bain d'huile
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ