NF EN ISO 22391-3

NF EN ISO 22391-3

January 2010
Standard Current

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : fittings

ISO 22391-3:2009 specifies the characteristics of fittings for piping systems made of polyethylene of raised temperature resistance (PE-RT), Type I and polyethylene of raised temperature resistance (PE-RT), Type II, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not the water is intended for human consumption (domestic systems) and for heating systems, under the design pressures and temperatures appropriate to the class of application according to ISO 22391-1. ISO 22391-3:2009 covers a range of service conditions (classes of application), design pressures and pipe dimension classes, and also specifies test parameters and test methods. In conjunction with the other parts of ISO 22391, it is applicable to fittings made of PE-RT, as well as to those made of other materials, intended to be fitted to pipes conforming to ISO 22391-2 for hot and cold water installations, the joints of which are in accordance with ISO 22391-5. It is applicable to the following types of fitting: - mechanical fittings; - socket fusion fitting; - electrofusion fittings; - fittings with incorporated inserts.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2010

Number of pages

22 p.

Reference

NF EN ISO 22391-3

ICS Codes

23.040.20   Plastics pipes
23.040.45   Plastics fittings
91.140.60   Water supply systems
93.025   External water conveyance systems

Classification index

T54-982-3

Print number

1 - 18/01/2010

International kinship

ISO 22391-3:2009

European kinship

EN ISO 22391-3:2009
Sumary
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3 : fittings

ISO 22391-3:2009 specifies the characteristics of fittings for piping systems made of polyethylene of raised temperature resistance (PE-RT), Type I and polyethylene of raised temperature resistance (PE-RT), Type II, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not the water is intended for human consumption (domestic systems) and for heating systems, under the design pressures and temperatures appropriate to the class of application according to ISO 22391-1.

ISO 22391-3:2009 covers a range of service conditions (classes of application), design pressures and pipe dimension classes, and also specifies test parameters and test methods. In conjunction with the other parts of ISO 22391, it is applicable to fittings made of PE-RT, as well as to those made of other materials, intended to be fitted to pipes conforming to ISO 22391-2 for hot and cold water installations, the joints of which are in accordance with ISO 22391-5.

It is applicable to the following types of fitting:

- mechanical fittings;

- socket fusion fitting;

- electrofusion fittings;

- fittings with incorporated inserts.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    2
  • 3 Termes, définitions, symboles et abréviations
    2
  • 3.1 Raccords en général
    3
  • 3.2 Raccords mécaniques
    3
  • 3.3 Raccords pour soudage à chaud
    3
  • 4 Caractéristiques mécaniques
    3
  • 4.1 Matériau du raccord en plastique
    3
  • 4.2 Matériau des raccords métalliques
    5
  • 4.3 Influence sur l'eau destinée à la consommation humaine
    6
  • 5 Caractéristiques générales
    6
  • 5.1 Aspect
    6
  • 5.2 Opacité
    6
  • 6 Caractéristiques géométriques
    6
  • 6.1 Généralités
    6
  • 6.2 Dimensions des emboîtures pour raccords pour soudage par l'emboîture et pour raccords électrosoudables
    6
  • 6.3 Dimensions des raccords métalliques
    10
  • 7 Caractéristiques mécaniques des raccords en plastique
    10
  • 7.1 Généralités
    10
  • 7.2 Matériau des raccords identique au matériau des tubes en PE-RT
    10
  • 7.3 Raccords en PE-RT non identique au matériau du tube en PE-RT
    10
  • 7.4 Raccords en plastique autre que PE-RT
    11
  • 8 Caractéristiques physiques et chimiques des raccords en plastique
    12
  • 8.1 Indice de fluidité à chaud en masse
    12
  • 9 Éléments d'étanchéité
    12
  • 10 Exigences d'aptitude à l'emploi
    12
  • 11 Marquage
    12
  • 11.1 Exigences générales
    12
  • 11.2 Marquage minimal exigé
    12
  • Bibliographie
    14
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ