NF EN ISO 1825

NF EN ISO 1825

December 2017
Standard Current mandatory application standard
  • Consult online for free
  • Consult the entire collection of French and European standards for free in the regional delegations of the AFNOR Group by clicking here

Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification

ISO 1825:2017 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft. All four types are designed for: a) use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume; b) operation within the temperature range of −30 °C to +65 °C and such that they will be undamaged by climatic conditions of −40 °C to +70 °C when stored in static conditions; c) operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service. NOTE 1 Type C hoses are intended for general pressure applications on all vehicles used for plane fuelling. They can also be used for vehicle/rail car loading and discharge where excessive vacuum does not occur. NOTE 2 Type F hoses can be used for plane delivery applications on vehicles that are also used for defuelling at high flow rates where type C hoses are not suitable. NOTE 3 Type E and F hoses can also be used for vehicle/rail car loading and discharge, for trailer to fueller transfer and for elevation platform supply (riser) to provide greater kink resistance.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

December 2017

Number of pages

39 p.

Reference

NF EN ISO 1825

ICS Codes

49.050   Aerospace engines and propulsion systems
49.100   Ground service and maintenance equipment
75.200   Petroleum products and natural gas handling equipment
83.140.40   Hoses

Classification index

T47-268

Print number

1

International kinship

ISO 1825:2017

European kinship

EN ISO 1825:2017
Sumary
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification

ISO 1825:2017 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft.

All four types are designed for:

a) use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume;

b) operation within the temperature range of −30 °C to +65 °C and such that they will be undamaged by climatic conditions of −40 °C to +70 °C when stored in static conditions;

c) operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service.

NOTE 1 Type C hoses are intended for general pressure applications on all vehicles used for plane fuelling. They can also be used for vehicle/rail car loading and discharge where excessive vacuum does not occur.

NOTE 2 Type F hoses can be used for plane delivery applications on vehicles that are also used for defuelling at high flow rates where type C hoses are not suitable.

NOTE 3 Type E and F hoses can also be used for vehicle/rail car loading and discharge, for trailer to fueller transfer and for elevation platform supply (riser) to provide greater kink resistance.

Replaced standards (1)
NF EN ISO 1825
July 2011
Standard Cancelled
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification

<p>ISO 1825:2010 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft.</p> <p>All four types are designed for</p> <ol> <li>use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume;</li> <li>operation within the temperature range of -30 °C to +65 °C and such that they will be undamaged by climatic conditions of -40 °C to +70 °C when stored in static conditions;</li> <li>operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service.</li> </ol>

Standard replaced by (1)
NF EN ISO 1825
July 2011
Standard Cancelled
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification

<p>ISO 1825:2010 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft.</p> <p>All four types are designed for</p> <ol> <li>use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume;</li> <li>operation within the temperature range of -30 °C to +65 °C and such that they will be undamaged by climatic conditions of -40 °C to +70 °C when stored in static conditions;</li> <li>operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service.</li> </ol>

Table of contents
View the extract
  • Avant-propos
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Classification
  • 5 Diamètres des tambours d'enroulement
  • 6 Matériaux et construction
  • 6 .2 Flexibles
  • 7 Dimensions et tolérances
  • 8 Propriétés physiques
  • 9 Propriétés électriques
  • 10 Fréquence des essais
  • 11 Marquage
  • 12 Rapport ou certificat d'essai
  • 13 Propreté
  • 14 Protection pour expédition et stockage
  • Annexe A (normative) Méthode pour la détermination des matières solubles dans le carburant
  • Annexe B (normative) Méthode d'essai de fragilité à froid
  • Annexe C (normative) Méthode de détermination de l'adhérence entre éléments
  • Annexe D (normative) Méthode de détermination de la résistance à la contamination du carburant
  • Annexe E (normative) Méthode d'essai de flexibilité à 20 °C
  • Annexe F (normative) Méthode d'essai de flexibilité à -30 °C
  • Annexe G (normative) Méthode d'essai de résistance à l'écrasement
  • Annexe H (normative) Méthode de détermination de la résistance au cycle de coquage
  • Annexe I (normative) Essais d'inflammabilité
  • Annexe J (normative) Essais hydrostatiques
  • Annexe K (normative) Méthode d'essai de résistance au vide
  • Annexe L (normative) Méthode d'essai de la sécurité de la fixation des raccordements
  • Annexe M (normative) Essais de type et essais de routine
  • Annexe N (informative) Essais recommandés pour l'acceptation de production
  • Annexe O (informative) Recommandations pratiques pour le rinçage et la manipulation des tuyaux
  • Bibliographie
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ