NF EN ISO 17268

NF EN ISO 17268

January 2017
Standard Cancelled

Gaseous hydrogen land vehicle refuelling connection devices

ISO 17268:2012 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors consisting of, as applicable, a receptacle and a protective cap (mounted on vehicle), and a nozzle. It applies to refuelling connectors which have working pressures of 11 MPa, 25 MPa, 35 MPa and 70 MPa, referred to as H11 - 11 MPa at 15 °C, H25 - 25 MPa at 15 °C, H35 - 35 MPa at 15 °C, H35HF - 35 MPa at 15 °C (high flow for commercial vehicle applications), and H70 - 70 MPa at 15 °C. Nozzles and receptacles that meet the requirements of ISO 17268:2012 will only allow GHLVs to be filled by fuelling stations dispensing hydrogen with nominal working pressures equal to or lower than the vehicle fuel system working pressure. They will not allow GHLV to be filled by fuelling stations dispensing blends of hydrogen with natural gas. Refuelling connectors dispensing blends of hydrogen with natural gas are excluded from the scope of ISO 17268:2012.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

January 2017

Number of pages

48 p.

Reference

NF EN ISO 17268

ICS Codes

43.060.40   Fuel systems
43.180   Diagnostic, maintenance and test equipment
71.100.20   Gases for industrial application

Classification index

M58-004

Print number

1

International kinship

ISO 17268:2012

European kinship

EN ISO 17268:2016
Sumary
Gaseous hydrogen land vehicle refuelling connection devices

ISO 17268:2012 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors consisting of, as applicable, a receptacle and a protective cap (mounted on vehicle), and a nozzle.

It applies to refuelling connectors which have working pressures of 11 MPa, 25 MPa, 35 MPa and 70 MPa, referred to as

  • H11 - 11 MPa at 15 °C,
  • H25 - 25 MPa at 15 °C,
  • H35 - 35 MPa at 15 °C,
  • H35HF - 35 MPa at 15 °C (high flow for commercial vehicle applications), and
  • H70 - 70 MPa at 15 °C.

Nozzles and receptacles that meet the requirements of ISO 17268:2012 will only allow GHLVs to be filled by fuelling stations dispensing hydrogen with nominal working pressures equal to or lower than the vehicle fuel system working pressure. They will not allow GHLV to be filled by fuelling stations dispensing blends of hydrogen with natural gas.

Refuelling connectors dispensing blends of hydrogen with natural gas are excluded from the scope of ISO 17268:2012.

Standard replaced by (1)
NF EN ISO 17268
February 2020
Standard Current
Gaseous hydrogen land vehicle refuelling connection devices

<p>This document defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors.</p> <p>GHLV refuelling connectors consist of the following components, as applicable:</p> <p>— receptacle and protective cap (mounted on vehicle);</p> <p>— nozzle;</p> <p>— communication hardware.</p> <p>This document is applicable to refuelling connectors which have nominal working pressures or hydrogen service levels up to 70 MPa.</p> <p>This document is not applicable to refuelling connectors dispensing blends of hydrogen with natural gas.</p>

Table of contents
View the extract
  • 1 Domaine d'application
  • 2 Références normatives
  • 3 Termes et définitions
  • 4 Exigences générales de construction
  • 5 Embouts
  • 6 Réceptacles
  • 7 Procédures d'essai de vérification de la conception
  • 8 Instructions
  • 9 Marquage
  • Annexe A Enveloppe de l'interface entre le réceptacle et l'embout
  • Annexe B Réceptacles pour hydrogène
  • Annexe C Appareillages d'essai non ajustés
  • Annexe D Appareillages d'essai ajustés
  • Annexe E Appareillages d'essai d'usure
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ