NF EN ISO 15874-1

NF EN ISO 15874-1

April 2013
Standard Current

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : general

ISO 15874-1:2013 specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or not intended for human consumption (domestic systems), and for heating systems, under design pressures and temperatures according to the class of application. It covers a range of service conditions (classes of application), design pressures and pipe dimension classes. It also specifies test parameters for test methods. In conjunction with the other parts of ISO 15874, ISO 15874-1:2013 is applicable to PP pipes, fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

April 2013

Number of pages

19 p.

Reference

NF EN ISO 15874-1

ICS Codes

23.040.20   Plastics pipes
91.140.60   Water supply systems

Classification index

T54-938-1

Print number

1 - 15/04/2013

International kinship

ISO 15874-1:2013

European kinship

EN ISO 15874-1:2013
Sumary
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : general

ISO 15874-1:2013 specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or not intended for human consumption (domestic systems), and for heating systems, under design pressures and temperatures according to the class of application.

It covers a range of service conditions (classes of application), design pressures and pipe dimension classes.

It also specifies test parameters for test methods.

In conjunction with the other parts of ISO 15874, ISO 15874-1:2013 is applicable to PP pipes, fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.

Replaced standards (2)
NF EN ISO 15874-1
May 2004
Standard Cancelled
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : general

<p>ISO 15874-1:2003 specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations, within buildings, for the conveyance of water which may or may not be intended for human consumption (domestic systems) or for heating systems, under design pressures and temperatures appropriate to the class of application.</p> <p>It covers a range of service conditions (classes of application), design pressures and pipe dimension classes.</p> <p>It also specifies the test parameters for the test methods referred to in the standard.</p> <p>In conjunction with the other parts of ISO 15874, it is applicable to PP pipes, fittings and their joints, including joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.</p>

NF EN ISO 15874-1/A1
October 2007
Standard Cancelled
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1 : general

Le présent document clarifie la définition du terme "tubes avec couche barrière" et complète l'amendement à l'ISO 15874-2 :2003/A1:2007.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions, symboles et abréviations
    1
  • 3.1 Termes et définitions
    1
  • 3.2 Symboles
    5
  • 3.3 Abréviations
    6
  • 4 Classification des conditions de service
    6
  • 5 Matière
    7
  • 5.1 Généralités
    7
  • 5.2 Influence sur l'eau destinée à la consommation humaine
    8
  • 5.3 Matière retraitable
    8
  • 6 Exigences de performance du système
    8
  • Bibliographie
    9
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ