NF EN ISO 1518-1
Paints and varnishes . Determination of scratch resistance . Part 1 : constant-loading method
Le présent document spécifie une méthode d'essai pour la détermination, dans des conditions définies, de la résistance à la pénétration d'un revêtement monocouche ou d'un système multicouche de peinture, de vernis ou de produit assimilé, par rayure au moyen d'un stylet à rayer sur lequel est appliquée une charge spécifiée. La pénétration du stylet se fait jusqu'au subjectile, sauf dans le cas d'un système multicouche où le stylet peut pénétrer soit jusqu'au subjectile, soit jusqu'à une couche intermédiaire. La Partie 2 traite de la méthode à charge variable.
Le présent document spécifie une méthode d'essai pour la détermination, dans des conditions définies, de la résistance à la pénétration d'un revêtement monocouche ou d'un système multicouche de peinture, de vernis ou de produit assimilé, par rayure au moyen d'un stylet à rayer sur lequel est appliquée une charge spécifiée. La pénétration du stylet se fait jusqu'au subjectile, sauf dans le cas d'un système multicouche où le stylet peut pénétrer soit jusqu'au subjectile, soit jusqu'à une couche intermédiaire. La Partie 2 traite de la méthode à charge variable.
<p>This document specifies a test method for determining under defined conditions the resistance of a single coating or a multi-coat system of paint, varnish or related product to penetration by scratching with a scratch stylus loaded with a specified load. Penetration of the stylus is to the substrate, except in the case of a multi-coat system, in which case the stylus can penetrate either to the substrate or to an intermediate coat.</p> <p>The method specified can be carried out</p> <p>a) either as a "pass/fail" test, by testing with a single specified load applied to the stylus to assess conformity with a particular specification, or</p> <p>b) as an assessment test by applying increasing loads to the stylus to determine the minimum load at which the coating is penetrated.</p> <p>NOTE Neither this document nor ISO 1518‑2 specifies a method using a curved stylus, which is specified in ISO 12137. The choice between the three methods will depend on the particular practical problem.</p>
- Avant-proposiv
-
1 Domaine d'application1
-
2 Références normatives1
-
3 Principe1
-
4 Appareillage2
-
5 Échantillonnage2
-
6 Panneaux d'essai4
-
7 Mode opératoire4
-
8 Fidélité5
-
9 Rapport d'essai6
- Bibliographie7
The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.
The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.
With Requirements, quickly access the main part of the normative text!
COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.
Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!
Request your free, no-obligation live demo
I discover COBAZ