NF EN ISO 13503-5

NF EN ISO 13503-5

August 2010
Standard Current

Petroleum and natural gas industries - Completion fluids and materials - Part 5 : procedure for measuring the long-term conductivity of proppants

ISO 13503-5:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel packing operations. ISO 13503-5:2006 provides a consistent methodology for testing performed on hydraulic fracturing and/or gravel packing proppants. The "proppants" mentioned henceforth in this part of ISO 13503-5:2006 refer to sand, ceramic media, resin-coated proppants, gravel packing media, and other materials used for hydraulic fracturing and gravel-packing operations. ISO 13503-5:2006 is not applicable for use in obtaining absolute values of proppant pack conductivities under downhole reservoir conditions.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

August 2010

Number of pages

35 p.

Reference

NF EN ISO 13503-5

ICS Codes

75.100   Lubricants, industrial oils and related products

Classification index

M87-272-5

Print number

1 - 06/09/2010

International kinship

ISO 13503-5:2006

European kinship

EN ISO 13503-5:2006
Sumary
Petroleum and natural gas industries - Completion fluids and materials - Part 5 : procedure for measuring the long-term conductivity of proppants

ISO 13503-5:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel packing operations. ISO 13503-5:2006 provides a consistent methodology for testing performed on hydraulic fracturing and/or gravel packing proppants. The "proppants" mentioned henceforth in this part of ISO 13503-5:2006 refer to sand, ceramic media, resin-coated proppants, gravel packing media, and other materials used for hydraulic fracturing and gravel-packing operations.

ISO 13503-5:2006 is not applicable for use in obtaining absolute values of proppant pack conductivities under downhole reservoir conditions.

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    v
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes et définitions
    1
  • 4 Abréviations
    2
  • 5 Modes opératoires pour l'évaluation de la conductivité à long terme des matériaux de soutènement
    2
  • 5.1 Objectif
    2
  • 5.2 Discussion
    2
  • 6 Réactifs et matières
    3
  • 6.1 Fluide d'essai
    3
  • 6.2 Grès
    3
  • 7 Appareillage de l'essai de conductivité à long terme
    3
  • 7.1 Bloc d'essai
    3
  • 7.2 Presse hydraulique
    4
  • 7.3 Dispositif(s) de mesure de l'épaisseur du matériau de soutènement
    4
  • 7.4 Circuit d'entraînement du fluide d'essai
    4
  • 7.5 Transducteurs de pression différentielle
    4
  • 7.6 Régulateurs de contre-pression
    4
  • 7.7 Balance
    4
  • 7.8 Élimination de l'oxygène
    5
  • 7.9 Régulation de la température
    5
  • 7.10 Saturation en silice et surveillance
    5
  • 8 Étalonnage de l'équipement
    6
  • 8.1 Indicateurs de pression et débits
    6
  • 8.2 Mesure de l'épaisseur zéro du matériau de soutènement
    6
  • 8.3 Détermination de la largeur de la cellule
    7
  • 8.4 Presse hydraulique
    7
  • 9 Essais de fuite
    7
  • 9.1 Presse hydraulique
    7
  • 9.2 Système de fluide d'essai
    7
  • 10 Mode opératoire pour le chargement des cellules
    8
  • 10.1 Préparation du bloc d'essai
    8
  • 10.2 Préparation de la cellule
    8
  • 11 Chargement de la (des) cellule(s) dans la presse
    10
  • 12 Acquisition des données
    11
  • 13 Calculs de la perméabilité et de la conductivité
    11
  • 14 Report des données
    13
  • Annexe A (informative) Facteurs de conversion
    14
  • Annexe B (normative) Configuration du récipient de saturation en silice
    15
  • Annexe C (informative) Figures
    17
  • Bibliographie
    26
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ