NF EN ISO 10077-2

NF EN ISO 10077-2

March 2013
Standard Cancelled

Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2 : numerical method for frames

ISO 10077-2:2011 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels. The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds). ISO 10077-2:2011 also gives criteria for the validation of numerical methods used for the calculation. ISO 10077-2:2011 does not include effects of solar radiation, heat transfer caused by air leakage or three‑dimensional heat transfer such as pin point metallic connections. Thermal bridge effects between the frame and the building structure are not included.

See more
View the extract
Main informations

Collections

National standards and national normative documents

Publication date

March 2013

Number of pages

51 p.

Reference

NF EN ISO 10077-2

ICS Codes

91.060.50   Doors and windows
91.120.10   Thermal insulation of buildings

Classification index

P50-737-2

Print number

1 - 13/02/2013

International kinship

ISO 10077-2:2012

European kinship

EN ISO 10077-2:2012
Sumary
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2 : numerical method for frames

ISO 10077-2:2011 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels.

The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds).

ISO 10077-2:2011 also gives criteria for the validation of numerical methods used for the calculation.

ISO 10077-2:2011 does not include effects of solar radiation, heat transfer caused by air leakage or three‑dimensional heat transfer such as pin point metallic connections. Thermal bridge effects between the frame and the building structure are not included.

Replaced standards (1)
NF EN ISO 10077-2
June 2004
Standard Cancelled
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2 : numerical method for frames

Le présent document spécifie une méthode et des données d'entrée exigées pour le calcul du coefficient de transmission thermique des profilés de menuiserie ainsi que du coefficient de transmission thermique linéique de leurs jonctions avec le vitrage et les panneaux opaques. Le présent document fournit des critères pour la validation des méthodes numériques utilisées dans ce calcul. Les effets des ponts thermiques entre les profilés de menuiserie et la structure du bâtiment, du rayonnement solaire, du transfert thermique provoqué par les infiltrations d'air, des transferts thermiques tridimensionnels ne sont pas pris en compte.

Standard replaced by (1)
NF EN ISO 10077-2
July 2017
Standard Current
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2 : numerical method for frames

<p>ISO 10077-2:2017 specifies a method and gives reference input data for the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels.</p> <p>The method can also be used to evaluate the thermal resistance of shutter profiles and the thermal characteristics of roller shutter boxes and similar components (e.g. blinds).</p> <p>ISO 10077-2:2017 also gives criteria for the validation of numerical methods used for the calculation.</p> <p>ISO 10077-2:2017 does not include effects of solar radiation, heat transfer caused by air leakage or three-dimensional heat transfer such as pinpoint metallic connections. Thermal bridge effects between the frame and the building structure are not included.</p> <p>NOTE Table 1 in the Introduction shows the relative position of ISO 10077-2:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.</p>

Table of contents
View the extract
  • Avant-propos
    iv
  • Introduction
    vi
  • 1 Domaine d'application
    1
  • 2 Références normatives
    1
  • 3 Termes, définitions et symboles
    1
  • 4 Méthode de calcul
    2
  • 4.1 Principe général
    2
  • 4.2 Vérification du programme de calcul utilisé
    3
  • 4.3 Détermination du coefficient de transmission thermique
    3
  • 5 Traitement des sections pleines et des conditions aux limites
    3
  • 5.1 Matériaux pleins
    3
  • 5.2 Émissivité des surfaces
    4
  • 5.3 Conditions aux limites
    4
  • 5.4 Coffres de volets roulants
    4
  • 5.5 Extensions des encadrements de fenêtres
    7
  • 6 Traitement des cavités
    7
  • 6.1 Généralités
    7
  • 6.2 Cavités dans les vitrages
    7
  • 6.3 Vides d'air non ventilés dans les encadrements et les coffres de volets roulants
    7
  • 6.4 Cavités et interstices ventilés
    11
  • 7 Rapport
    12
  • 7.1 Généralités
    12
  • 7.2 Données géométriques
    13
  • 7.3 Données thermiques
    13
  • 7.4 Résultats
    13
  • Annexe A (informative) Conductivité thermique de matériaux courants
    14
  • Annexe B (normative) Résistances superficielles
    17
  • Annexe C (normative) Détermination du coefficient de transmission thermique
    19
  • Annexe D (normative) Exemples pour la vérification des programmes de calcul utilisés
    23
  • Annexe E (informative) Essences de bois énumérées dans l'Annexe A
    36
  • Annex E (informative) Wood species listed in Annex A
    37
  • Anhang E (informative) In Anhang A aufgeführten Holzarten
    38
  • Bibliographie
    41
ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ