ISO 17892-8:2018

ISO 17892-8:2018

February 2018
International standard Current

Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test

ISO 17892-8:2018 specifies a method for unconsolidated undrained triaxial compression tests. ISO 17892-8:2018 is applicable to the laboratory determination of undrained triaxial shear strength under compression loading within the scope of geotechnical investigations. The cylindrical specimen, which can comprise undisturbed, re-compacted, remoulded or reconstituted soil, is subjected to an isotropic stress under undrained conditions and thereafter is sheared under undrained conditions. The test allows the determination of shear strength and stress-strain relationships in terms of total stresses. Non-standard procedures such as tests with the measurement of pore pressure or tests with filter drains are not covered in this document. NOTE This document fulfils the requirements of unconsolidated undrained triaxial compression tests for geotechnical investigation and testing in accordance with EN 1997‑1 and EN 1997‑2.

See more
View the extract
Main informations

Collections

International ISO standards

Publication date

February 2018

Number of pages

14 p.

Reference

ISO 17892-8:2018

ICS Codes

13.080.20   Physical properties of soils
93.020   Earthworks. Excavations. Foundation construction. Underground works

Print number

1
Sumary
Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test

ISO 17892-8:2018 specifies a method for unconsolidated undrained triaxial compression tests.

ISO 17892-8:2018 is applicable to the laboratory determination of undrained triaxial shear strength under compression loading within the scope of geotechnical investigations.

The cylindrical specimen, which can comprise undisturbed, re-compacted, remoulded or reconstituted soil, is subjected to an isotropic stress under undrained conditions and thereafter is sheared under undrained conditions. The test allows the determination of shear strength and stress-strain relationships in terms of total stresses.

Non-standard procedures such as tests with the measurement of pore pressure or tests with filter drains are not covered in this document.

NOTE This document fulfils the requirements of unconsolidated undrained triaxial compression tests for geotechnical investigation and testing in accordance with EN 1997‑1 and EN 1997‑2.

Replaced standards (2)
ISO/TS 17892-8:2004
October 2004
Technical specification Cancelled
Geotechnical investigation and testing - Laboratory testing of soil - Part 8 : unconsolidated undrained triaxial test

<p>ISO/TS 17892-8:2004 specifies the test method for the determination of the compressive strength of a cylindrical, water-saturated specimen of undisturbed or remoulded cohesive soil when first subjected to an isotropic stress without allowing any drainage from the specimen, and thereafter sheared under undrained conditions within the scope of the geotechnical investigations according to prEN 1997-1 and -2.</p> <p>NOTE "Water-saturated" refers to the in-situ condition. The material tested need not necessarily be saturated at all stages during the laboratory testing.</p>

ISO/TS 17892-8/AC1:2006
January 2006
Technical specification Cancelled
Technical corrigedum 1 to standard ISO/TS 17892-8:2004

ZOOM ON ... the Requirements department
To comply with a standard, you need to quickly understand its issues in order to determine its impact on your activity.

The Requirements department helps you quickly locate within the normative text:
- mandatory clauses to satisfy,
- non-essential but useful clauses to know, such as permissions and recommendations.

The identification of these types of clauses is based on the document “ISO / IEC Directives, Part 2 - Principles and rules of structure and drafting of ISO documents ”as well as on a constantly enriched list of verbal forms.

With Requirements, quickly access the main part of the normative text!

With Requirements, quickly access the main part of the normative text!
What is the Redline format?
The Redline + service - standards comparator allows you to easily and simply identify major changes between the current standard and its last canceled version.

At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula.
At a glance, you will be able to identify the additions, deletions or modifications to a text, table, figure and formula

The Redlines + service is offered to you on the collection of French standards in force, in French language and in HTML and PDF format.

For an overview of the service, click on View a standard in redline format
Need to identify, monitor and decipher standards?

COBAZ is the simple and effective solution to meet the normative needs related to your activity, in France and abroad.

Available by subscription, CObaz is THE modular solution to compose according to your needs today and tomorrow. Quickly discover CObaz!

Request your free, no-obligation live demo

I discover COBAZ